Articles:

Then remove the post-motor filter by rotating it anti-clockwise until it can be pulled off the back of the vacuum..

Here are three methods for removing ground in dirt and refreshing your carpet’s appearance.. It’s inevitable that carpets get dirty.Vacuuming, taking off your shoes, and washing pet’s paws can delay it, but in the long-term every carpet suffers from ground in dirt.. Once dirt has been pushed deep in carpet fibres, your vacuum won’t be able to remove it.

Instead, you’ll need a more targeted cleaning method.Here are three examples that can remove ground in dirt..Carpets vary in material and design, so it’s important to test any new cleaning method on a small patch of hidden carpet before using it on a wider area.

Wait at least 24 hours to check that the carpet’s colour hasn’t been affected.. 1.Clean the Affected Area With Washing Up Liquid.

One of the easiest ways to clean ground in dirt is with a mixture of washing up liquid and water.. You don’t need much washing up liquid for this.

A quarter teaspoon of washing up liquid added to around 250ml of plain water is plenty.These can permanently damage the filter..

Step 4: Allow The Filter To Dry.It’s important to allow the filter to dry completely before you re-insert it into the vacuum cleaner.

A wet or damp filter is susceptible to mould and could even damage the vacuum’s motor.. Vax recommends waiting at least 24 hours for the filter to dry before using it again.Make sure that the filter is somewhere warm and with plenty of airflow to speed up the drying process..